🧪 New tutorials are being published — build from robot arms to sensors step by step
Skip to content

Changelog ​

Documentation updates ​

DateChange
2026-09-26Initial documentation set published as draft: Quick Start, Flashing & Updates, Verify Your System, Product Overview, Interfaces & Hardware Layout, FAQ, Troubleshooting, Downloads, the JetPack 6.x → 7.2 migration guide, five tutorials (Local LLM, Memory Efficiency, DeepStream, Robotics, Agentic AI), Glossary, and this Changelog. Written against NVIDIA's official documentation for JetPack 7.2.1; not yet verified on physical hardware.

JetPack releases for this kit ​

JetPackJetson Linux (L4T)DateNotes
7.2.139.2.12026-08Current. The ISO now flashes the Orin Nano Developer Kit with the Super Mode configuration by default, which addresses the r39.2 issue where ISO-updated units stayed on their previous power profile.
7.239.2.02026-06First JetPack 7 release for the Orin family (Ubuntu 24.04, kernel 6.8, CUDA 13.x). Known issue on this release: units updated via the Jetson ISO did not default to Super mode — see Troubleshooting.
6.2.x36.x2025JetPack 6 line for this kit (Ubuntu 22.04). This is where the "Super" power mode was introduced — the same hardware, with higher CPU/GPU/memory clocks and the 25 W mode.
6.0 / 6.136.x2024–2025Earlier JetPack 6 releases.
5.1.335.x2023–2024Oldest firmware line still referenced today: the JetPack 6.x Update Path uses a 5.1.3 bridge image to bring very old kits up to JetPack 6.x-generation firmware before JetPack 7 can be installed.

Full histories: JetPack Archive · Jetson Linux Archive

To update your kit, see Flashing & Updates; to check what you are running, see Verify Your System.

Sources ​

Status: draft, pending review by cheny. Grounded in NVIDIA's official documentation as of the dates listed; not yet verified on physical hardware by Juxi Technology.


NVIDIA® and Jetson™ are trademarks of NVIDIA Corporation. This page is published by Juxi Technology and is not an NVIDIA publication.