USB Auto-Focus Camera

Buy on Taobao

Overview

A plug-and-play HD camera module designed for robot vision, AI inference and computer vision applications. It offers an 86° wide-angle field of view, auto-focus and 1080P 30FPS video output over the UVC standard protocol, with no driver installation required.

Key features:

USB driver-free, UVC standard protocol, plug and play
Compatible with Windows / Linux / macOS / Jetson / Raspberry Pi
86° wide-angle lens for a broader field of view
Auto-focus (AF), no manual adjustment needed
1080P 30FPS HD video stream

Specifications

Parameter	Specification
Resolution	1920 × 1080 (1080P)
Frame rate	30 FPS
Field of view	86° wide angle
Focus	Auto-focus (AF)
Interface	USB 2.0
Protocol	UVC (USB Video Class)
System support	Windows / Linux / macOS / Jetson / Raspberry Pi

Quick Start

1. Connect the camera

Plug the camera into a USB port — no additional drivers are needed.

2. Verify the device is detected

bash

# Linux / Jetson / Raspberry Pi
ls /dev/video*
v4l2-ctl --list-devices

A USB camera typically exposes two video devices (for example the newly added /dev/video2 and /dev/video3); use the lower-numbered one.

3. Read frames with Python

python

import cv2

cap = cv2.VideoCapture(0)
cap.set(cv2.CAP_PROP_FRAME_WIDTH, 1920)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, 1080)
cap.set(cv2.CAP_PROP_FPS, 30)

while True:
    ret, frame = cap.read()
    if not ret:
        break
    cv2.imshow('USB Camera', frame)
    if cv2.waitKey(1) & 0xFF == ord('q'):
        break

Tutorials

Applications

Robot vision and teleoperation video feeds
AI inference and computer vision projects
Multi-camera setups on Jetson / Raspberry Pi (alongside CSI cameras)
Live streaming, screen recording and video capture

FAQ

Q: The camera is not detected?

A: Make sure the USB cable is firmly connected, try another USB port, and check the USB device list with lsusb.

Q: The image is blurry?

A: The camera auto-focuses; wait 2-3 seconds after connecting. If it is still blurry, check that the lens surface is clean.

Q: How do I change the resolution?

A: Use cap.set(cv2.CAP_PROP_FRAME_WIDTH, width) and cap.set(cv2.CAP_PROP_FRAME_HEIGHT, height).

Support

📧 Email: support@juxitech.com
🌐 Website: www.juxitech.com
💬 Issue tracker

USB Auto-Focus Camera ​

Overview ​

Specifications ​

Quick Start ​

1. Connect the camera ​

2. Verify the device is detected ​

3. Read frames with Python ​

Tutorials ​

Applications ​

FAQ ​

Support ​