Download and Burn Firmware for Chinese and English Recognition Words
The module has been pre-flashed with the voice recognition function firmware at the factory, and the factory firmware is also provided in the attached materials. If you need to re-create the firmware, you can follow the steps below to make the firmware.
Enter Qiying Tairen Voice AI Platform
Register an official website account with Qiying Tailun
Click on the top menu "Platform Features", and select "In-depth Development of Product Firmware and SDK"
Click "Offline Speech Recognition Large Model Application"
Click "Speech Recognition Firmware and SDK Development"
New Project
Product Information Completion
**Product Name:**Follow your own naming rules
**Application Solution: ** Select "Single Microphone Speech Recognition"
Product Type:"General -> Intelligent Central Control"
**Chip Model:**Cl1302
**sdk名称：**Cl13XX_SDK_ASR_Offline
**SDK Version:**1.12.16
**Description:**Just follow your own description rules
Firmware Information Selection
Here you can choose Chinese or English
**Version Name:**Follow your own versioning rules
**Language Type:**Select according to your own needs
Select Acoustic Type:
**Chinese Selection:**VO0681_Chinese_ASR_General_0.9M
**English Selection:**VO0916_English_ASR_General_1.1M
**Module Board Selection:**CI-D02GS02S
Firmware Configuration
Download Wake Word Firmware
Upload - Select the wake word table for the corresponding language
Click "Submit Now"
Wait a few minutes to download the firmware
Two lists of command word and broadcast word protocols are provided here. Those who need to can make changes according to this table on their own.
[命令词播报词协议列表V3_中文模板.xlsx]
[命令词播报词协议列表V3_英文模板.xlsx]
Voice Module Firmware Flashing
Download the Compressed Packet of the Voice Module Flashing Software
[语音模块固件烧录软件.7z]
- Open the software after decompression
Select "CI1302" for the firmware, then click "Firmware Upgrade"
- Plug the sound card into the computer and open Device Manager
- Move to the firmware burning software page
Sound card button position
After completion, you can move to the corresponding other tutorials on the left
Here are the prepared firmware materials, which can be directly flashed
[CI1302_中文_单麦_V00681_UART0_115200_2M.bin]
[CI1302_英文_单麦_V00916_UART0_115200_2M.bin]
Precautions
- CH341 Driver Installation (Install as Administrator)
https://www.wch.cn/downloads/CH341SER_EXE.html
If the device is recognized as an unknown device, such as USB Single Serial or USB Serial, in Device Manager, please right-click to uninstall it first, and then install the driver!